碳氫清洗機的清洗原理主要基于以下幾個方面：

　　The cleaning principle of hydrocarbon cleaning machine is mainly based on the following aspects:

　　加熱 ：

　　Heating:

　　碳氫清洗機首先將碳氫溶劑加熱至蒸汽狀態。這一過程通常在機內完成，通過加熱器將溶劑轉化為氣態，以便于后續的清洗過程。

　　The hydrocarbon cleaning machine first heats the hydrocarbon solvent to a steam state. This process is usually completed inside the machine, converting the solvent into a gaseous state through a heater for subsequent cleaning processes.

　　滲透 ：

　　infiltration:

　　待清洗的物體被放入清洗機中，蒸汽通過物體表面滲透到內部，溶解表面的污垢。由于碳氫溶劑與污垢之間的親和力較大，這種溶劑能夠有效地吸附并帶出污垢。

　　The object to be cleaned is placed in the cleaning machine, and steam penetrates through the surface of the object to dissolve the dirt on the surface. Due to the high affinity between hydrocarbon solvents and dirt, this solvent can effectively adsorb and remove dirt.

　　分離 ：

　　Separation:

　　在清洗過程中，通過物理性質差異（如密度、極性等），將污垢和溶劑分離。碳氫溶劑由于其非極性特性，能夠更好地溶解油脂和油類污染物，從而實現高效的脫脂效果。

　　During the cleaning process, dirt and solvents are separated by differences in physical properties such as density and polarity. Carbon hydrogen solvents, due to their non-polar properties, can better dissolve oils and oil pollutants, thereby achieving efficient degreasing effects.

　　冷凝 ：

　　Condensation:

　　蒸汽通過冷凝器進行冷凝，形成液體狀的碳氫溶劑。這一步驟有助于回收和循環利用溶劑，減少資源浪費和環境污染。

　　Steam is condensed through a condenser to form liquid hydrocarbon solvents. This step helps to recycle and reuse solvents, reducing resource waste and environmental pollution.

　　回收 ：

　　Recycling:

　　冷凝后的溶劑經過分離和回收系統，重新回到清洗機中循環使用。這一過程不僅提高了清洗效率，還降低了清洗成本。

　　The condensed solvent is separated and recovered by the system, and then returned to the cleaning machine for recycling. This process not only improves cleaning efficiency, but also reduces cleaning costs.

　　此外，碳氫清洗機還可以結合超聲波技術進行清洗。超聲波空化作用會在清洗液中形成微小氣泡，氣泡破裂時產生的沖擊波和高溫高壓能夠進一步強化乳化、溶解作用，從而加速除油過程，提高清洗效果。

　　In addition, the hydrocarbon cleaning machine can also be combined with ultrasonic technology for cleaning. Ultrasonic cavitation can form tiny bubbles in the cleaning solution. The shock wave and high temperature and pressure generated when the bubbles burst can further enhance emulsification and dissolution, thereby accelerating the oil removal process and improving the cleaning effect.

　　在真空環境下進行清洗時，由于氣體壓力降低，碳氫溶劑的沸點也隨之降低，這使得清洗過程可以在更低的溫度下進行，從而避免高溫對被清洗物品造成損傷，同時提高清洗效率。

　　When cleaning in a vacuum environment, due to the decrease in gas pressure, the boiling point of hydrocarbon solvents also decreases, which allows the cleaning process to be carried out at lower temperatures, thereby avoiding damage to the cleaned items caused by high temperatures and improving cleaning efficiency.

　　本文由碳氫清洗機友情奉獻.更多有關的知識請點擊:http://www.6131420.com真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a hydrocarbon cleaning machine For more information, please click: http://www.6131420.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.