High pressure water deburring is an advanced deburring technology that can complete component disassembly and cleaning processes within the same equipment. It can remove metal machining burrs and debris from blind holes, deep holes, chamfers, and internal and external surfaces of parts.

高壓水去毛刺可以在電化學上結合毛刺技術，同時去除毛刺部位銳角銳邊鈍化、圓形和復雜部位的毛刺。可以在去毛刺之前提前清洗，去毛刺清洗和沖洗，循環結束后可以吹風和干燥。這樣就去除了預洗和后洗過程，節省了投資，減少了循環時間。

High pressure water deburring can be combined with electrochemical deburring technology, while removing burrs in sharp corners, edges, passivation, circular and complex areas. Before deburring, it is possible to clean, deburr, and rinse in advance. After the cycle, it can be blown and dried. This eliminates the pre washing and post washing processes, saves investment, and reduces cycle time.

高壓水去毛刺可見技術用于高精度和清潔標準的復雜金屬零件。可以處理各種外觀和材料的零件，以滿足重要的和批量生產要求。高壓水毛刺機在研究和設計理念上可以滿足汽車、農業、船舶、航空航天等廣泛的產業應用。

High pressure water deburring visible technology is used for complex metal parts with high precision and cleaning standards. It can handle parts of various appearances and materials to meet important and batch production requirements. The high-pressure water burrs machine can meet a wide range of industrial applications such as automobiles, agriculture, shipbuilding, aerospace, etc. in research and design concepts.

高壓水去毛刺機將部件發送到毛刺工程前，應提前清洗部件上下表面、內外，去除明顯的油污，去除大量碎屑。將部件發送到毛刺工程進行毛刺處理。

Before the high-pressure water deburring machine sends components to the deburring project, the upper and lower surfaces, inside and outside of the components should be cleaned in advance to remove obvious oil stains and a large amount of debris. Send the components to the burr engineering for burr treatment.

高壓水去毛刺機預清洗和清除毛刺，使用ECM將毛刺與高壓水射流切割系統相結合，安裝在設備自動作業系統中，設備就可以實現全自動作業。

The high-pressure water deburring machine pre cleans and removes burrs. By combining the burrs with the high-pressure water jet cutting system using ECM and installing it in the automatic operation system of the equipment, the equipment can achieve fully automatic operation.

高壓水去毛刺的應用

Application of high-pressure water for deburring

1.生產效率高，一般來說，一個工件的全部毛刺可以在10秒內全部去除，可以輕松地進行多項平行加工，加工生產率不受加工質量的直接限制，一般適合大批量零件加工。

1. High production efficiency. Generally speaking, all burrs on a workpiece can be removed within 10 seconds, making it easy to perform multiple parallel processing. The processing productivity is not directly limited by the processing quality, and is generally suitable for large-scale parts processing.

2.加工面積稍大，加工面寬的拐角工件。中心設計復雜，各系統均采用自動化設備，適合大規模生產。設備投資比較高，占地面積大。電化學液對設備、工作服無腐蝕作用，電化學液體環境無污染。

2. Corner workpieces with slightly larger processing area and wider processing surface. The center design is complex, and all systems use automated equipment, making it suitable for large-scale production. The equipment investment is relatively high and the land occupation is large. Electrochemical liquid has no corrosive effect on equipment and work clothes, and the electrochemical liquid environment is pollution-free.

本文的精彩內容由高壓去毛刺清洗機提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://www.6131420.com我們有專門的客服為您解答問題

The exciting content of this article is provided by the knowledge of high-pressure deburring cleaning machines. There are also many exciting content on this website, and you can click to enter more content: http://www.6131420.com We have dedicated customer service to answer your questions